新后悬挂for Tamiya TRF415MS

Tamiya Pro Module Suspension Set

  Available from Tamiya is a new concept in suspension design, the Pro-Module Rear Suspension system for the 415MS and Evolution IV chassis kits. The Pro-Module Rear Suspension incorporates the upper link and wheel hub as part of the dampening system as apposed to a conventional design. This effectively creates a linkage system (cantilever) with no additional moving parts. The result is a reactive and exponential dampening geometry to enhance control and drivability. Both the arms and hubs are machined aluminum finished with a bold anodized plating, hubs feature 0 deg. of toe.

可得到从Tamiya 是一个新概念在悬浮设计、赞成模块后方悬浮系统为415MS 和演变IV 底盘成套工具。赞成模块后方悬浮合并上部链接和轮子插孔作为挫伤的系统一部分依照apposed 对一个常规设计。这有效地创造联结系统(悬臂式) 没有另外的运动机件。结果是易反应和指数挫伤的几何提高控制和drivability 。胳膊和插孔是用机器制造的铝被完成以一层大胆的正极化的镀层, 插孔特点0 度脚趾。


The Pro-Module Rear Suspension system includes:

1002 - Pro-Module Suspension Arm 2pc
1003 - Pro-Module Suspension Hub 2pc
N/A - Spring (Red) 2pc
9805611 - 5 X 9mm Ball Connector 2pc
53533 - 3 X 16mm Titanium Screw 4pc
9805894 - 10mm Spacer 4pc
9804153 - 5.5 X 2mm Spacer 2pc
9804152 - 5.5 X 3mm Spacer 2pc


[upload=jpg]picture/onroad/20055235493788098.jpg[/upload]
[upload=jpg]picture/onroad/20055235501369846.jpg[/upload]
[upload=jpg]picture/onroad/20055235502420385.jpg[/upload]

设计意图大概是为了让避震的反应更直接些吧。。。。。

      [upload=jpg]picture/onroad/2005523553892133.jpg[/upload]

      我刚换好后金属hub，ft

髮過暸～～