MT2玩家注意

部分MT2的差速出厂存在质量问题，导致传动齿与大齿盘结合处的虚位，令差速齿迅速损耗
解决方法：加垫片调整齿轮间隙可以延长使用寿命，最佳办法：更换
原文：Scott, there is a well-documented problem with the large final gears in the MT2 differential. According to HPI, some of these gears were cast (they are cast aluminum) wrong, allowing some axial slop that chewed them up. The UK guys running this truck were shimming the input shafts, which seemed to work.

The HPI guy was very honest about it, and they sent me some free gears, supposedly of the new type. I pulled the front diff, and the gear in there was the same as what HPI sent. So they either sent me the "old" gear, or my truck had the "new" ones. I bought the truck last month, but no telling how long it sat on the dealer''''s shelf.

I have about 20 tanks through mine, and no stripping so far. I think the people who are stripping these gears are also beating the hell out of their trucks. Just my personal opinion.
[em42][em42]
国外玩家就可以免费更换，国内就无福享受了。
更多信息

http://www.rcuniverse.com/forum/m_1505231/mpage_2/key_/tm.htm

[此贴子已经被作者于2004-9-26 8:04:27编辑过]

靠！！！HPI太不负责了

我的MT1代上面也有这个Bug，也必须通过垫片的方式调整！

也不是人家不负责!只是国内没有代理!免费更换很难实行!

了解～

无语`````谁能上个图片告诉我怎么加垫片啊  谢谢啦```

拆开看了，确实有很大的虚位，
买两个大齿盘，该加垫片的加垫片吧：（

[此贴子已经被作者于2004-9-27 14:40:55编辑过]