本帖最后由 skyrc 于 11-4-8 17:32 编辑 Introduction Auto cut discharger for AAA size Ni-MH rechargeable batteries 0.9V cut off. - Eliminate memory effect of NiMH cells and maximize battery life. - Four independent discharging slots.- LED indicators for easy check of discharging status.- 1000mA current for fast discharging.- 0.9V cut off. - Aluminum case for superior heat dissipation.- Screw type battery terminal is comfortable to fix battery.Perfect for Mini-Z racer How to Use 1. Put 1 – 4 cells of NiMH batteries into the slot. Make sure polarity of the batteries are in right direction. ![]() 2. Tighten the screws gently until their tips touch to the batteries. LEDs will glow when you put 2 cells on 1-2 slots or 3-4 slots. If you put only one cell in any slot, the LED will not turn on. However the battery is under discharging process. (To turn on the LEDs, you need 2 cells in pair) ![]() 3. When LEDs turn off, please unscrew 4 screws and take out the batteries from the tray. ![]() Size: 72.5x56x26.6mm Weight: 81g Battery type: AAA size, MiMH only Cell of discharge: 1 - 4 cell Max. discharge current: 1,000mA Cut off voltage: 0.9V (Please take out battery from discharger after cut off) Status of discharge: Discharging: LED glow, Finished: LED off Case Materials: Aluminum |
广告投放|联系我们|手机|投稿|Archiver|About us|Advertise|遥控迷模型网|RCFans ( 粤ICP备10210518号-1 )
版权所有 RCFans.com © 2003-2016